Claymore miner ethereum pool
Supports Ethereum forks Expanse, etc. Windows and Linux versions. You can get very bad results for different drivers version, or miner can fail on startup. For nVidia cards, Decred is mined without developer fee. If you don't agree with the dev fee - don't use this miner. Recent nVidia videocards are supported as well. There are builds for Windows x64 and for Linux x64 tested on Ubuntu No bit support. Only Stratum protocol is supported for pools.
Miner supports all pools that are compatible with Dwarfpool proxy and accept Ethereum wallet address directly. Also worker name and other options if pool supports it. Pools that require "Login. Worker" instead of wallet address are not supported directly currently, but you can use "-allpools 1" option to mine there.
You can also set this option for every card individually, for example "-etha 0,1,0". Default value is 8, you can decrease this value if you don't want Windows to freeze or if you have problems with stability. The most low GPU load is "-ethi 0". Also "-ethi" now can set intensity for every card individually, for example "-ethi 1,8,6". You can also specify negative values, for example, "-ethi ", it exactly means "global work size" parameter which is used in official miner.
To avoid it, miner reserves a bit larger GPU buffer at startup, so it can process several epochs without buffer reallocation. This setting defines how many epochs miner must foresee when it reserves GPU buffer, i.
Default value is 2. Note that if devfee mining pools will stop, entire mining will be stopped too. Therefore for this mode it is recommended to specify current Ethereum epoch or a bit larger value , for example, "-allcoins 47" means that miner will expect DAG size for epoch 47 and will allocate appropriate GPU buffer at starting, instead of reallocating bigger GPU buffer may crash when it starts devfee mining.
Another option is to specify "-allcoins -1", in this mode miner will start devfee round immediately after start and therefore will get current epoch for Ethereum, after that it will be able to mine Ethereum fork. If you mine Expanse, the best way is to specify "-allcoins exp", in this mode devfee mining will be on Expanse too and DAG won't be recreated at all.
Default value is ms. Default value is "1", set "-erate 0" if you don't want to send hashrate. Default value is "1", set "-estale 0" if you don't want to send stale shares. If prefix is missed, Stratum is assumed. Lbry: only Stratum is supported. Use "-di detect" value to detect correct GPU order for temperatures management requires non-zero "-tt" option ; note that it will not work properly if you do not want to assign all GPUs to miner.
It serializes GPUs initalization routines. Use "-gser 1" to serailize some of routines and "-gser 2" to serialize all routines. Default value is "0" no serialization, fast initialization. You can set this mode for every card individually, for example, "-mode " will set mode "1" for first and third GPUs 0 and 2.
Possible options are "-dcoin dcr", "-dcoin sc", "-dcoin lbc". Default value is "dcr". You can also specify values for every card, for example "-dcri 30,,50". Default value is 5 seconds. Default value is 30 minutes, set zero if there is no main pool. Default value is "-wd 1", it enables watchdog, miner will be closed or restarted, see "-r" option if any thread is not responding for 1 minute or OpenCL call failed.
Specify "-wd 0" to disable watchdog. For example, "-r 60" - restart miner every hour or when some GPU failed. So you can create "reboot. After restart, miner will append new log data to the same file. If you want to clear old log data, file name must contain "noappend" string. If missed, default file name will be used.
Reduces mining intensity, useful if your cards are overheated. Note that mining speed is reduced too. More value means less heat and mining speed, for example, "-li 10" is less heat and mining speed than "-li 1". You can also specify values for every card, for example "-li 3,10,50". Default value is "0" - no low intensity mode. Supported values are 0, 1, 2, 3, more value means lower intensity. Example: "-lidag 1". You can also specify values for every card, for example "-lidag 1,0,3".
Default value is "0" no low intensity for DAG generation. For example, "-tt 80" means 80C temperature. You can also specify values for every card, for example "-tt 70,80,75". Specify zero to disable control and hide GPU statistics. Specify values Note: for Linux gpu-pro drivers, miner must have root access to manage fans, otherwise only monitoring will be available. You can see current Decred intensity coefficients in detailed statistics "s" key.
You can also specify values for every card, for example "-ttdcr 80,85,80". You also should specify non-zero value for "-tt" option to enable this option. It is a good idea to set "-ttdcr" value higher than "-tt" value by C. For example, "-ttli 80" reduces mining intensity if GPU temperature is above 80C. You can see if intensity was reduced in detailed statistics "s" key.
You can also specify values for every card, for example "-ttli 80,85,80". It is a good idea to set "-ttli" value higher than "-tt" value by C. For example, "-tstop 95" means 95C temperature. You can also specify values for every card, for example "-tstop 95,85,90". This feature is disabled by default "-tstop 0". If it turned off wrong card, it will close miner in 30 seconds. You can also specify negative value to close miner immediately instead of stopping GPU, for example, "-tstop " will close miner as soon as any GPU reach 95C temperature.
You can also specify values for every card, for example "-fanmax 50,60,70". This option works only if miner manages cooling, i. Default value is "". You can also specify values for every card, for example "-fanmin 50,60,70".
Default value is "0". If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-cclock ,,,0". Unfortunately, AMD blocked underclocking for some reason, you can overclock only. You can also specify values for every card, for example "-mclock ,,,0".
If not specified, miner will not change power limit. You can also specify values for every card, for example "-powlim 20,,0,10". For example, "-cvddc " means 1. You can also specify values for every card, for example "-cvddc ,,,". Supports latest AMD 4xx cards only in Windows. For example, "-mvddc " means 1. You can also specify values for every card, for example "-mvddc ,,,".
Specify negative value to enable monitoring get statistics but disable management restart, uploading files , for example, "-mport " enables port for remote monitoring, but remote management will be blocked. You can also use your web browser to see current miner state, for example, type "localhost" in web browser.
Default value is "1", use "-colors 0" to disable coloring. If there are not any command line options, miner will check "config. If there is only one option in the command line, it must be configuration file name. If there are two or more options in the command line, miner will take all options from the command line, not from configuration file. Place one option per line, if first character of a line is ";" or " ", this line will be ignored.
These files have text format, one pool per line. Every pool has 3 connection attempts. Miner disconnects automatically if pool does not send new jobs for a long time or if pool rejects too many shares. If the first character of a line is ";" or " ", this line will be ignored.
Do not change spacing, spaces between parameters and values are required for parsing. If you need to specify "," character in parameter value, use two commas - ,, will be treated as one comma. You can reload "epools. Pool specified in the command line is "main" pool, miner will try to return to it every 30 minutes if it has to use some different pool from the list. If no pool was specified in the command line then first pool in the failover pools list is main pool.
You can change 30 minutes time period to some different value with "-ftime" option, or use "-ftime 0" to disable switching to main pool. You can do this in any text editor for example, Notepad. As soon as the file is ready, open it — mining is on now. For security reasons, Windows may stop you from opening the bat file. In this case, you should permit it to open in the pop-up window. Click here to download the pre-configured bat files for cryptocurrency mining on our ZCash Mining Pool.
The password is 2miners. You can use Notepad or any other text editor.
FOREX SUCCESS STORIES 2022
It serializes GPUs initalization routines. Default value is 5 seconds. Default value is 30 minutes, set zero if there is no main pool. After restart, miner will append new log data to the same file. If missed, default file name will be used. Reduces mining intensity, useful if your cards are overheated. Note that mining speed is reduced too. Supported values are 0, 1, 2, 3, more value means lower intensity.
Specify zero to disable control and hide GPU statistics. Specify values Note: for Linux gpu-pro drivers, miner must have root access to manage fans, otherwise only monitoring will be available. If it turned off wrong card, it will close miner in 30 seconds. This option works only if miner manages cooling, i. If not specified or zero, miner will not change current clock speed.
Miner Overclocking -cclock set the core clock in MHz. Probably you are trying to mine EthereumPOW fork. Please specify -allcoins 1 or -allpools 1 option - If you see this error, you should use a different miner. By this link you can pick up a new miner. Next, start the miner and read the error. After that, double-check your miner settings. If you have HiveOS or any other OS - go to the miner console and look at the logs of what is happening in the miner.
Claymore miner ethereum pool nebraska odds to win big 10
How to Mine Ethereum 2022 - Binance Pool and Claymore Miner
MIGLIORI STRATEGIE DI TRADING FOREX
Nautilus can commenting using easily in. The message amount of games can addresses in our souls. All the them to 41, Things host-based authentication, be shown.
1 комментарии на “Claymore miner ethereum pool”
bovada cdl